IAR I-jet

デバッグプローブがIAR Embedded Workbench for Armの優れた機能を使用可能に。

製品＆見積もりに関するお問い合わせ
i_jet

01

IAR Embedded Workbenchのネイティブサポート

統合開発ツールが開発ワークフローを簡素化します。IARの高機能インサーキットトレースデバッグ用プローブを使えば、IAR Embedded Workbench for ARMの強力な機能を存分に使えるようになります。

02

クラス最高の処理能力

I-jetは、JTAGおよびSWD/SWO経由の高速デバッグプラットフォームを提供します。最大ダウンロード速度1.89 MByte/秒で、60MHzまでのSWOクロック速度に対応。JTAGおよびSerial Wire Debug (SWD)のクロック速度は最大32MHz。MCUクロック速度には制限はありません

03

広範なArmサポート

自動コア認識とJTAG/SWD検出により、すべてのシリコンベンダのあらゆるArm7/Arm9/Arm11、Arm Cortex-A/R/Mコアをサポート。ARM Cortex-M0+用マイクロ トレース バッファ(MTB)にも対応しています。

04

パワーデバッグ

パワーデバッグ機能を使って、組み込みシステムへのソフトウェア実装時にシステムの消費電力に及ぼす影響を情報として得ることができます。I-jetから最大容量400ｍAのターゲット電源を供給可能で、200 kHz時、最小分解能200 Aで消費電力を測定できます。

Details and probe comparison

Specifications

  • General
           I-jet      I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm
    USB connection High Speed USB 2.0 SuperSpeed USB 3.0 SuperSpeed USB 3.0 SuperSpeed USB 3.0
    USB speed 480 Mbps 5 Gbps 5 Gbps 5 Gbps
    Powered through USB  ✔  ✔  ✔  ✔
    Maximum target power (5V) supplied  400 mA  400 mA  400 mA  400 mA
    First supporting version of IAR
    Embedded Workbench for Arm    		 6.30.8 7.30.3 7.80.1 7.70.1

     

  • Included adapters
           I-jet      I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm
    MIPI-10 ✔ ✔ ✔ ✔
    MIPI-20 ✔ ✔ ✔ ✔
    Mictor-38       ✔

     

  • Optional adapters
      I-jet I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm 
    MIPI-20 to ARM-20 Available Available Available Available
    MIPI-20 Isolated (ETM not supported) Available Available Available

    Available

     

  • Core support
           I-jet      I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm
    Arm7/Arm9/Arm11 ✔ ✔ (no ETM trace) ✔ (no ETM trace) ✔ (no ETM trace)
    Arm Cortex-M ✔  ✔  ✔  ✔
    Arm Cortex-R ✔ ✔  (1/2/4 bit ETM trace only) ✔ (1/2/4 bit ETM trace only) ✔
    Arm Cortex-A ✔ ✔ (1/2/4 bit ETM trace only) ✔  (1/2/4 bit ETM trace only) ✔

     

  • Interfaces
      I-jet I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm
    JTAG ✔ ✔ ✔ ✔
    SWD ✔ ✔ ✔ ✔
    cJTAG ✔ ✔ ✔ ✔
    SWO UART/Manchester encoding ✔ ✔ ✔ ✔
    Target debug I/O voltages supported 1.65V to 5.5V 1.2V to 5V 1.2V to 5V 1.2V to 5V

     

  • Trace features
           I-jet      I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm
    ETM trace buffer   64 MB 256 MB 256 MB
    Trace data collection   1,2, and 4-bit 1,2, and 4-bit 1,2,4,8 and 16-bit
    Maximum ETM trace clock   150 MHz 150 MHz 350 MHz
    Maximum ETM bandwidth   1.2 Gbps 1.2 Gbps 11.2 Gbps
    Automatic clock/data skew adjustment   ✔ ✔ ✔
    Automatic clock/data threshold adjustment       ✔
    ETB/MTB Trace support ✔ ✔ ✔ ✔

     

  • Performance
      I-jet I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm
    JTAG/SWD speed 48 MHz 100 MHz 100 MHz 100 MHz
    SWO sampling frequency 96 MHz 200 MHz 200 MHz 200 MHz
    SWO max. bandwidth ~30 Mbps ~60 Mbps ~60 Mbps ~60 Mbps
    Download speed (RAM) 1.89 MByte/s 3.73MByte/s 3.73MByte/s 3.73MByte/s
    Power sampling resolution ~160 µA ~160 µA ~160 µA ~160 µA
    Power sampling rate 200 ksps 200 ksps 200 ksps 200 ksps

     

  • Functionality
      I-jet I-jet Trace CM L I-jet Trace CM XL I-jet Trace for Arm
    Automatic core recognition ✔ ✔ ✔ ✔
    Code breakpoints ✔ ✔ ✔ ✔
    Data breakpoints ✔ ✔ ✔ ✔
    Flash breakpoints ✔ ✔ ✔ ✔
    Interrupt logging ✔ ✔ ✔ ✔
    Data logging ✔ ✔ ✔ ✔
    Call stack trace With ETB ✔ ✔ ✔
    Cycle counter (For Cortex-M devices) ✔ ✔ ✔ ✔
    Code coverage Sampled/Full with ETB/MTB Full Full Full
    Function profiling Sampled/Full with ETB/MTB Full Full Full
    Instruction trace Instruction trace Full Full Full

     

製品／見積もりに関する問い合わせ

製品に関するお問い合わせや見積もりのご依頼は、以下のフォームに必要事項をご記入の上、送信ボタンをクリックしてください。
＊は必須項目となっています

Additional information

CE and RoHS compliance

  • Our debug probes I-jet, I-jet Trace and I-scope are in compliance with:CE: EMC Directive 2014/30/EU on the following test standards for IT product:EN 55022:2010/AC:2011, EN 61000-3-2:2014 & EN 61000-3-3:2013EN 55024: 201++A1:2015CE: RoHS 3 Directive (EU) 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, including all applicable amendments—Directive (EU) 2015/863FCC: the requirements of 47 CFR Part 15 regulation & ANSI C63.4 for the evaluation of Class A of electromagnetic compatibility.Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).Regulation (EC) No 850/2004, (EU) No 519/2012 of the European Parliament and of the Council on Persistent Organic Pollutants (POPs )US provision to the Wall Street Reform and Consumer Protection Act (ref: Dodd-Frank Act 1502 on conflict minerals)SJ/T 11363-2006 for Management Methods for Controlling Pollution by Electronic Information Products (China RoHS)Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on Waste Electrical & Electronic Equipment (WEEE)We keep working together with our partners and suppliers to fulfill our responsibility to ensure our are products in compliance with the above directives, regulations and requirements.

Connectors and adapters

  • I-jet and I-jet Trace has a MIPI-20 connector on the front panel and come with MIPI-20 and MIPI-10 cables. For I-jet Trace, only the MIPI-20 cable supports the ETM trace functionality, and MIPI-10 is for plain JTAG/SWD/SWO debugging. For details on the connectors, see the user manual.

    In addition, the following adapters are available from IAR to fit different target connectors:

    ADA-MIPI20-ISO Adapter adapter_mipi20_iso

     
    ADA-MIPI20-ARM20  

    ADA-MIPI20-RISCV12

    		  

    ADA-MIPI20-RISCV24